Cantey Foundation Specialists Before & After Photos

Sam C. of Seneca, SC had numerous large and unseemly cracks in his garage floor and walls.  Not wanting to replace all of the concrete slab, Sam researched online and asked around about alternate solutions.  System Design Specialist and friend Trey Smedley told Sam C. about Cantey's patented PolyLEVEL system that would inexpensively raise and level his concrete.  Within two weeks, Cantey was on its way to help stabilize and fix the cracks in Sam's garage!

Kevin M. has been a homeowner in Seneca, SC for years. His home was built close to another home so he had a brick wall built to create privacy for his home. A few months ago Kevin began to notice a crack forming on his wall. Upon further investigation, he saw that the wall was leaning. Not wanting this problem to get worse he looked for a company that could offer him the right solution. He called around but most companies told him to replace the wall entirely. This was going to be a costly option so Kevin decided to do some more digging. He finally found Cantey Foundation Specialists after searching the internet for a wall stabilizing solution. He scheduled an appointment with System Design Specialist Katherine Dillon. Specialist Katherine came out and did an inspection and told Kevin about Cantey's patented GeoLock Anchor system to save his wall. These wall anchors would be installed on the interior of the wall then a steel rod would be placed through the wall. This rod would anchor the wall using the most competent soil underneath the surface. This anchor system would stabilize the wall and stop the leaning. Production Team Leader Aubrey McJunkin, Production Team Member Francisco Lopez, and Production Team Member Oscar Mota came out and effectively installed the GeoLock Anchor system. Kevin is now happy he found Cantey when he did to give him a lower cost and better solution to save his wall.

Joan and Kevin M. of Seneca, SC just bought their first home. Being newlyweds they decided to choose a fixer-upper home that they could afford and slowly make renovations on. Joan wanted to be able to use the outdoor patio and possibly even make it enclosed like a screened porch. The patio, however, had begun to sink so before moving forward with any other plans they had to solve this issue. Kevin's father recommended Cantey Foundation Specialists because he had heard excellent talk about them in the community. Joan and Kevin called and made an appointment with System Design Specialist Katherine Dillon. Katherine did her inspection and told Joan and Kevin about Cantey's PolyLevel process. Small holes would be drilled through the concrete slab of the patio where the PolyLevel would be injected. The PolyLevel comes out as a liquid and fills all the void that is causing the concrete slab to sink. Within 15 minutes this liquid hardens and forges a stable foundation while lifting the slab. Production Team Leader Jeremey Wilson and Production Team Member Nick Collins came out and effectively injected the patio with the PolyLevel process. Joan and Kevin are so impressed with the way their patio looks they want to move forward making it into a screened porch.

Cindy P. is a homeowner in Hartwell, GA who enjoys the porch on the bottom of her home. She is able to read the books she loves and knit out in the fresh air while still having some shade. Because she spends so much of her time on the porch she noticed when the top of it started to lean. This happened over time but recently started to concern Cindy. She did an internet search on her issue and found Cantey Foundation Specialists. She called in the next day and was scheduled for an appointment with System Design Specialist Dallas Rabideaux. When Dallas arrived for the scheduled appointment Cindy took him over to the problem area of the porch. After the inspection, Dallas came to the conclusion that Cindy needed Cantey's patented SmartJack system to lift and stabilize the porch area. Dallas further explained that the process would start by removing sections of soil where the tightly compacted crushed stone would fill to create a stable base for the footing to be placed on top. A steel beam that would be specifically cut to fit under the porch would then be placed on top of the footing and attached to the top of the add-on. These steel beams or SmartJacks could then be adjusted to lift the add-on to its proper position. Production Team Leader Israel Santana and Production Team Member Jonathan Lowder came out and successfully installed the SmartJack system to Cindy's porch. Cindy is once again relaxing on her porch, no longer having to worry about its stabilization.

Ronnie M. wanted to remodel his kitchen, but he noticed that the cabinets were tilting away from the wall and that the floor was sloping.  Calling Cantey Foundation Specialists, System Design Specialist Nathan Bailey inspected Ronnie's home and found that one of the wooden beams underneath the floor was not fully supported.  Cantey's solution?  Send in Production Crew led by Taylor Hanniford to install two SmartJacks under the center beam which supported the kitchen floor above.  The SmartJacks lifted and stabilized the floors so that Ronnie could begin remodeling his kitchen without any fear!